Roof bars, one rear cross bar (top rear), and rear clip repair. Still lots of welding yet to do.
I need to square the rear end in the chassis. Going to use the front ball joints for wheelbase and the centerline of the chassis width for the side to side.
Shooting for 73" so that I have 1/4" either direction to shorten or lengthen wheelbase.
Chassis centerline should get me inline side to side.
I have my trailing arms, top link and panhard bars; To determine where I need to place the frame mounts.
I also have several shock and spring combinations already set up. For now, I will go with the initial spring combos that Randy suggested to me. That should help me get the spring mounts in the right spot. All mounts will be somewhat adjustable. Going to tack everything in place for the time being. They like being able to roll the car around if need be. As I said; Still lots to do! At least I am finally seeing some progress being made. Was a very slow start. They have had he car for over a month and a half. I try to be patient, as I know this is a sponsorship deal. Not looking like we will be done anytime for this season.
Steve