Tire bead sealer

[JGRacing]

I b0ught some tire bead sealer at Napa to take care of the little leaks in the tire bead from hand mounting them.  The label has almost no useful information.  What is the best was to use this stuff?  Paint it on the wheel bead or tire bead?  Do I pop the bead on the rim then let the air out to take pressure off of it while it dries?  Are there any temperature minimums?   

[justfreaky]

John,

I would think that you let the air out of the tire; Pop the beads; and apply (paint on) the sealer to both the wheel and the tire bead; Let it tack up and re-air the tire.
Room temp should probably be at least 50*. (wild guess)
I've never used the stuff, so not 100% on that.

Steve

[VMS Motorsports]

Yup....just plan on cleaning alot of crap off your wheels every time you need to replace the tires...its really just a type of caulk, if you will, to seal. I'd choose to just check my tire pressures every time i go out, cleaner and less labor intensive in the long run

[JGRacing]

I really chewed up the edge of the couple of the tires.  These radials don't mount up as easily as the old Hoosier bias ply tires did on the modified.  Maybe I will just use it on the ones that leak the most.  Now if I could just get a reasonable temperature in my garage.    

[VMS Motorsports]

Move to Canada!

[JGRacing]

Then you have to deal with polar bear attacks and all of that stuff. 

[RickyBobby]

Polar bears, you have to live in an Igloo, take the dog sled to work....but hey we have heated garages :-)

I know Steve OFF TOPIC :-). 

[JGRacing]

I assumed everyone drove snow mobiles to work from their igloos, not dog sleds.  That is just crazy talk.  

[MegaMang]

Those of us with more money use snow machines to drive our dogs around.  They get really pampered.
 

[VMS Motorsports]

I can just see my 16 pound miniature schnauzer pulling me on a sled!!! Wonder how long before Steve throws up the off topic smiley face?

[justfreaky]

Off Topic
 

[justfreaky]

If ya gotta go by sled...

Do it right!

[JGRacing]

On something like that tire bead sealer would not be needed.  Does that bring this back around to on topic again?   

[justfreaky]

LOL!
It's all about the traction!!! 
I think that if you are tearing up the beads on your tires, that you need to find a better way to mount them.
I have heard everything from Windex window cleaner to dish soap used as a lubricant to mount tires.
I always had my local tire shop mount them for me... Put their name on the car somewhere, tell all your friends what nice people they are to deal with...
Cost = $0.00
Sponsorship and new friends = Priceless!
 

Just my .02 worth

Steve

[JGRacing]

Are you saying a big hammer and a tire iron might not be ideal for mounting dry radial tires?   

The tire shops around me are all chain places and usually want some some stupid amount of money to mount tires (even without a balance).  With how few tires I will hopefully be going through, hand mounting a tire here and there should not be a big deal.  I just need to be more carefull with the bead.  Was trying to avoid soapy water or anything that might increase the humidity in the tires, but will probably need to start using something.  I guess Windex should evaporate pretty quickly if I let the tire sit after getting it on the wheel, before I seat the bead.