What oil catch can are you using?

[DARK AGE 53]

if you have any pics please post them, if you have a link where you bought it please post that also.

Later,
Al

[racerrad8]

I install the JAZ  one qt breather bottle with a -8 fitting on customers cars that want them. i mount it on the firewall, run the breather hose forward around the front of the carbs, over the top of the carbs and into the fitting on the bottle. Make sure the hose has consistant drop back to the engine. If it has low area(s) it will hold oil and pressurize the crankcase.

http://www.jazproducts.com/breather_tanks.html

I use part number - 605-825-01

Randy - RPM

[DARK AGE 53]

Thanks for the reply Randy, question. .......what type of hose/fitting do you use on the bottle?

Thanks.

[speedyracing11]

I think the same as the oil cooler lines that go to the top end lines.Or use a tranny line hose.It is thicker than fuel line.

[racerrad8]

Thanks for the reply Randy, question. .......what type of hose/fitting do you use on the bottle?

Thanks.

I use -8 blue push-lock hose for this. It is stiff enough that it does not kink under the carbs when it gets hot. It is a 1/2 I.D. and hooks right to the engine and allows me to use a -8/90' A/N fitting on the other end at the bottle. I don't have any cars in the shop right now with the JAZ bottle. But there one here with an aluminum bottle that has been routed the same way. He used a hydraulic hose that he got from his autopartstractor supply, but it doesn't need to be that heavy of a hose for the application. I will take a photo and stry and send it a little later.

Randy - RPM

[DARK AGE 53]

Thanks for the info, look forward to seeing those pics.

Al

[racerrad8]

The files for the pictures are too large and they will not go through. Send me an email directly to RPM@swaybar.com and I can send them to you directly.

Thanks,
           Randy - RPM

[DARK AGE 53]

The files for the pictures are too large and they will not go through. Send me an email directly to RPM@swaybar.com and I can send them to you directly.

Thanks,
           Randy - RPM

E-mail sent.

[DARK AGE 53]

pics weren't too large ( 320/240 ), here's the pics from Randy.

[racerrad8]

Well, I tried...It kept telling me the attachement files were too big. These computers are not my cup of tea...rather be working on my Legends car...

Thanks for posting them, Randy

[justfreaky]

Thanks for the pics Randy!

As Always,
 Thanks for posting them Al!!!

Steve

[qweedqwag]

This is one I made a copy from another after market brand. http://www.pdm-racing.com/products/imag/pdmcan3-large.jpg


Mike

[justfreaky]

I've seen those on eBay dirt cheap. Was thinking about getting one.
Thanks for the pic Mike!

Steve