« previous next »
Pages: [1]   Go Down

Author Topic: Setrab Cooler  (Read 5029 times)

Offline art1

  • Newbie
  • *
  • Posts: 8
Setrab Cooler
« on: August 25, 2015, 08:20:13 pm »
 I have a Setrab 920 oil cooler with the fan pack and a setrab top end cooler. My question is about the bracket, can I mount it below the frame rails or does it need to be placed on top of the rails. Standard INEX bracket.

Thanks,

Art
Logged


Offline VMS Motorsports

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3524
    • VMSmotorsports.com
Re: Setrab Cooler
« Reply #1 on: August 25, 2015, 09:42:01 pm »
53. OIL COOLERS & LINES: Oil coolers must be cooled by air only (no dry ice systems or other type). All oil cooling systems (including lines) must be mounted in the engine compartment only. No oil coolers or lines may be mounted in the drivers’ compartment or in the rear deck. More than one oil cooler is permitted. Oil cooler fans are permitted. Push-lock fittings are permitted. Oil coolers may not be mounted below the bottom of the front bumper. Aftermarket oil coolers are permitted.

Oil Cooler Scoops -Oil cooler air scoops (with a max. wall thickness of 1/8” sheet metal) must fit completely between frame rails and may not extend below or attach to the stock front bumper.
Logged
JIM BUCHER
VMS Motorsports
Worldwide Legends Parts Supplier
(262)255-7100
http://www.vmsmotorsports.com/

Offline amp racing

  • Full Member
  • ***
  • Posts: 172
Re: Setrab Cooler
« Reply #2 on: August 27, 2015, 11:06:58 pm »
 we run our bracket from the bottom up.. never had an issue..
joe
Logged
Pages: [1]   Go Up
« previous next »