GREASE

[RickyBobby]

So what all needs greasing on the Legend car.  I see the ball joints and the steering rack.  What else is there?

[justfreaky]

Wheel Bearings



Probably more; But I haven't slept in over 18 hours.
I'm sure that some of the more seasoned members will let you know.



Steve

[JGRacing]

I found a grease fitting towards the front of my driveshaft.

[justfreaky]

U-Joints

[MegaMang]

Some tie rod ends have grease nipples.  Some ball joints... 

Mike

[pegalis]

Ball joints, tierod ends, u-joints (Depending on what brand you use.)   Also, give the hiems a good squirt of a teflon based lubricant like TriFlow brand lube.
*FYI* NEVER use wd-40 as a lubricant.  It is a cleaner and will attract dust, and not provide lubrication at all.

If your tierod ends or ball joints do not have a zerk fitting *grease nipple*   Get a zerk kit and install them.  Drill a 1/8" hole on the cup side of the joint, tap it and install the fitting.  You will not regret it.