CLICK HERE to join this forum.
Ritchie I thought we were going to try the 100lbs spring set up? joe
Thank you guys for the posts. I did check out that camber cutting link. I am racing meridian and magic valley in Idaho. I Thank you Richie for the set up notes. I am wondering if this may be alot of small spacer problems in my front and rear radious rods. I have been this season from 1 degree of pinion all the way up to 6 degree like were running now. When we had the pinion angle at one degree the car felt like it had no turn in on decel and we would seriously have to run 54 to 55 percent cross to get the car to enter the corner all cross increases were done by putting 1/4 tun in the rf and 1/4 turn out lf untill the car was comfortable to charge the corner entry. I like to drive in with a car in front at the same speed and get back to the throttle 10 to 15% just before apex and turn the car under and get full throttle first to beat them to the next corner. tells alittle about my style. Oh! also I have had the rear brake turned all the way to off and back a half since mid season. I read the setup posted at the beginning of this forum I think by Justfreaky. I took pretty good care in putting the car together but maybe just not enough?