Carb Install Question

[N4Racing]

Another newby question for you guys!

My car was delivered to me without the carbs installed.  The carbs came yesterday and I cannot get them into the seals.  I have coated the seals and carb flanges with a light coat of silicone lube (sprayed onto a rag and wiped onto the parts), but I cannot push them into the seals.

What am I missing?

Thanks, Jeff

[amp racing]

clamps loose alot..... i use silicone jelly on them , also if its cold i heat the boots a little with the heat gun ... push on from the bottom up..ketch the bottom lip and push twards the top..

joe

[VMS Motorsports]

Keep on pushing after the clamps are as loose as possible.
It can take alot of effort

[N4Racing]

Great advise!  The heat gun did the trick.  Thanks.

Next dumb question - - There are 2 white plastic nipples and 4 aluminum nipples at the bottom of the carbs (not counting the fuel inlet nipple in the middle), what are you supposed to hook up to them?

Thanks, Jeff

[VMS Motorsports]

drain lines

[N4Racing]

Great, thank you.