« previous next »
Pages: [1]   Go Down

Author Topic: steering joint  (Read 6247 times)

Offline racerdad

  • Full Member
  • ***
  • Posts: 143
steering joint
« on: November 28, 2012, 07:59:03 pm »
need to know what steering joint goes on the rack? is it a 36 spline 5/8 shaft to a 3/4 shaft?
thanks cody
Logged


Offline NJRacer510

  • Full Member
  • ***
  • Posts: 168
    • Team 510 Racing
Re: steering joint
« Reply #1 on: November 29, 2012, 07:42:47 am »
Call up Jeff Jordan at RPM Proformance in N.Carolina. He has all the u-joints you need plus he makes his own pro-comp steering column which has a splined u-joint where the top half connects to the bottom half. After putting these in our cars I wont ever go back to the normal style.
Logged
TODD McCOLLUM #m1
www.TEAM510RACING.com

knoxracing

  • Guest
Re: steering joint
« Reply #2 on: November 29, 2012, 09:29:10 am »
The steering joint you are looking for is 3/4 smooth bore to 36 spline, the important part is the .620 or 5/8  shaft size of the 36 spline. The sweet mfg. number is 401-50607
Dennis Knox
Buckeye legends
330-310-9212
Logged

Offline racerdad

  • Full Member
  • ***
  • Posts: 143
Re: steering joint
« Reply #3 on: November 29, 2012, 06:50:25 pm »
So the joint I got was a sweet 5/8 36 spline to a round 3/4 and the number is  910-32225-pln. The joint I got is way to tight I would have to beat  it on with hammer.  Thanks cody
Logged

knoxracing

  • Guest
Re: steering joint
« Reply #4 on: November 29, 2012, 09:03:06 pm »
I tried to locate that number you listed but could not.
Logged

Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4517
Re: steering joint
« Reply #5 on: November 29, 2012, 09:12:33 pm »
You can always ream or hone it out a bit for a better fit.

Steve
Logged
Better to be hated for who you are, Than to be loved for who you are not.
Pages: [1]   Go Up
« previous next »