Author Topic: Charlotte Road Course Set Up  (Read 7089 times)

Offline legendsracer21

  • Newbie
  • *
  • Posts: 7
Charlotte Road Course Set Up
« on: January 24, 2012, 10:20:51 pm »
Does any one have a basic road course set up for Charlotte Winter Heat they would like to share?  Thanks.




Offline rob

  • Jr. Member
  • **
  • Posts: 76
    • J & R Motorsports
Re: Charlotte Road Course Set Up
« Reply #1 on: January 25, 2012, 12:29:55 pm »
250  250
200 200
camber 4 / 4
caster    3 /3
ride hight  3 3/4  3 3/4
                       4           4
wheel base equal both sides
pressures  24  24
                      23  23
good starting point. when we were racing there after he was comfortable with the track, we went with a little more of a oval setup on the left side.
there are a lot of left turns, and the rights are slow turns,
Rob


Offline legendsracer21

  • Newbie
  • *
  • Posts: 7
Re: Charlotte Road Course Set Up
« Reply #2 on: January 25, 2012, 10:11:30 pm »
Are those pressures for the Federals?

What was your cross %

Offline rob

  • Jr. Member
  • **
  • Posts: 76
    • J & R Motorsports
Re: Charlotte Road Course Set Up
« Reply #3 on: January 26, 2012, 09:28:58 am »
cross was around 51 and change,
pressures for bf's but should be close.
with the federals they have to be on the correct way for both sides.
you will have to have a set of lefts cut.

Offline legendsracer21

  • Newbie
  • *
  • Posts: 7
Re: Charlotte Road Course Set Up
« Reply #4 on: January 26, 2012, 12:50:13 pm »
With left cuts the out side of the left side  tires will have less tread and the inside of the right sides would have less correct?


Offline legendsracer21

  • Newbie
  • *
  • Posts: 7
Re: Charlotte Road Course Set Up
« Reply #5 on: January 26, 2012, 11:09:44 pm »
Also what was the toe?


Offline rob

  • Jr. Member
  • **
  • Posts: 76
    • J & R Motorsports
Re: Charlotte Road Course Set Up
« Reply #6 on: January 27, 2012, 08:55:39 am »
correct on the cut.
toe 0 -1/16

 

anything