Author Topic: Ignition problems  (Read 28698 times)

Offline Chunk

  • Jr. Member
  • **
  • Posts: 57
Re: Ignition problems
« Reply #30 on: September 23, 2011, 04:41:12 pm »
It does it just sitting on jack stands at 6-7 thousand as well as on the track


knoxracing

  • Guest
Re: Ignition problems
« Reply #31 on: September 24, 2011, 10:54:57 am »
Are you SURE you do not have carb issuse?


Offline Chunk

  • Jr. Member
  • **
  • Posts: 57
Re: Ignition problems
« Reply #32 on: September 25, 2011, 10:23:45 pm »
I am positive. I have swapped them.

Offline apm motorsports

  • Newbie
  • *
  • Posts: 40
Re: Ignition problems
« Reply #33 on: September 26, 2011, 06:32:38 pm »
if you have red coils make sure sparkplug wires are all the way in you should not see the connector. if notthat   spray wd40 around carb boots and behind where those vaccum boots are

Offline VMS Motorsports

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3524
    • VMSmotorsports.com
Re: Ignition problems
« Reply #34 on: September 26, 2011, 06:34:40 pm »
Have you changed the pick up plate yet??
JIM BUCHER
VMS Motorsports
Worldwide Legends Parts Supplier
(262)255-7100
http://www.vmsmotorsports.com/


Offline Chunk

  • Jr. Member
  • **
  • Posts: 57
Re: Ignition problems
« Reply #35 on: September 26, 2011, 07:37:33 pm »
Have you changed the pick up plate yet??


no, that is my next move


Hoopy_boy

  • Guest
Re: Ignition problems
« Reply #36 on: September 27, 2011, 03:47:14 am »
 I've been waiting the plate swap result before my next suggestion too

~ G ~

Offline VMS Motorsports

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3524
    • VMSmotorsports.com
Re: Ignition problems
« Reply #37 on: September 27, 2011, 07:50:02 am »
Do you run the cover? If so, make sure that the plate does not contact the cover at all, look for evidence of contact/shorting.
Have seen different model year cover gaskets that are thinner that will allow contact/arcing.
JIM BUCHER
VMS Motorsports
Worldwide Legends Parts Supplier
(262)255-7100
http://www.vmsmotorsports.com/


Offline Legends57x

  • Sr. Member
  • ****
  • Posts: 414
Re: Ignition problems
« Reply #38 on: September 27, 2011, 01:33:59 pm »
Jim,

I heard there was some arcing going on inside your helmet too....Now I know why you have no hair on your melon.  ;D
Mark Ritger
INEX Legends #1x

Hoopy_boy

  • Guest
Re: Ignition problems
« Reply #39 on: September 28, 2011, 01:01:30 am »
 Man... that last comment sure explains the realavence of a recupitulation valve to an infragnator stage point !
(whew) motor should rock in rpms now.... main topic answered ?? hmmm

~ Gimp ~


Offline Legends57x

  • Sr. Member
  • ****
  • Posts: 414
Re: Ignition problems
« Reply #40 on: September 28, 2011, 10:42:27 am »
Sorry Gimp....I just couldn't resist. ;)

Now back to the original post of assisting with the ignition problem.
Mark Ritger
INEX Legends #1x

Hoopy_boy

  • Guest
Re: Ignition problems
« Reply #41 on: September 28, 2011, 12:27:19 pm »
 Lol... all in good fun ! Made me chuckle. I was waiting responce from Jim in defense or agreement

Offline VMS Motorsports

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3524
    • VMSmotorsports.com
Re: Ignition problems
« Reply #42 on: September 28, 2011, 03:30:15 pm »
I'm just waiting to see how long it's going to take to put in the pick-up plate...
JIM BUCHER
VMS Motorsports
Worldwide Legends Parts Supplier
(262)255-7100
http://www.vmsmotorsports.com/

Hoopy_boy

  • Guest
Re: Ignition problems
« Reply #43 on: September 28, 2011, 03:36:48 pm »
 I hear ya... was wondering if it was a valve issue or a cam follower hanging up in the head if the plate doesn't fix it

~ G ~

Offline Chunk

  • Jr. Member
  • **
  • Posts: 57
Re: Ignition problems
« Reply #44 on: September 28, 2011, 11:03:06 pm »
I am pulling the engine out this weekend. My wife has a long list of  Hone-do's before I can get back to work on it. I do run the cover and will inspect for wear and maybe even space it out a ways?. I am putting the engine in a different car to get ready for the nationals so I am planning on pulling it out and inspecting the plate and pick ups well, and changing it regardless of how it looks. Thanks for the help guys!