Hey guys,
I hate to start another thread on this but I am
.
I was having a lot of play in my steering shaft through the heim and the plastic bushings that are on the steering shaft tube. This thread was a big help as far as the bushings are concerned;
http://www.legendsracer.com/index.php?topic=2662.0 I found some bronze bushings at the hardware store, put them in and it took all of the play out of that area. I think it was Denis Knox that recomend drilling a hole, tapping and installing a set screw on each bushing. Instead of doing that I installed a locking collar on each end steering shaft by the bushing so they dont slide out of the tube. I left a little bit of a gap with a feeler gauge to make sure nothing would bind up.
My main question is this. In regards to the locking collars, Is this something I should be concerned with as far as tech goes?
Thanks for the help guys!
Eric