Well.............. that took long enough!
![](http://i1141.photobucket.com/albums/n589/wiggles84/GIP%20Pics/20150122_101513_zpsw1gfqqtp.jpg)
This stuff machines like a dream! Biggest issue was the shavings wrapping around the cutter I use and leaving a less then desirable finish. I also went with a different size brass hardware that needs less work to usable for this. It also took awhile to find a seller that had the terminals I wanted for those tiny 22 Ga. wires and took paypal. But I am glad I did find one, made terminating the wire just about fool proof.
So I will put out the tester request again. I have the following people as testers if they still want. I will add others to the list in order I receive replys\PM's.
There are only three unts at this time1. canabl
2. knoxracing
3. Vern Houseman4.??So I know said FREE in the first post, but I'd like to charge something to help cover some of the materials and cost of shipping. I think $25 within the US. For anyone outside the US, I'd say the $25 plus what everextra it costs over the normal $10 or so it costs me to ship within the US.
And Yes, there is more then $15 worth of materials in the unit
![Tongue :P](http://www.legendsracer.com/Smileys/default/tongue.gif)
Let me know,
Andrew