« previous next »
Pages: [1]   Go Down

Author Topic: Oil fill cap with fitting...  (Read 6675 times)

Offline slack11

  • Sr. Member
  • ****
  • Posts: 261
Oil fill cap with fitting...
« on: August 24, 2013, 09:49:51 am »
Who carries/ sells the oil fill cap that has the fitting in it to use as a breather?  Not looking for the whole setup, just the cap with the fitting for an oil line.

Thanks
Logged


Offline s10custom

  • Sr. Member
  • ****
  • Posts: 282
  • It is what it is
Re: Oil fill cap with fitting...
« Reply #1 on: August 24, 2013, 07:16:22 pm »
try;  http://store01.prostores.com/servlet/andrewsmotorsports/the-188/Legends-Race-Car%2CBaby-Grand/Detail

I got one from INEX and could not find an oring to fit enough to seal, I took it back off.

Robert
Logged

knoxracing

  • Guest
Re: Oil fill cap with fitting...
« Reply #2 on: August 24, 2013, 10:38:52 pm »
THE FITTING YOU ARE REFERRING TO RERPALCES THE FILL CAP WITH AN 8AN ADPIER FITTING. typically YOU WOULD REMOVE THE O-RING FROM THER FILL CAP AND INSTALL IT  ON THE ADAPTER. tHE FITTING IS AVAILABLE FROM MANY SOURCES. CURT ANDREWS HAS THEM LISTED ON E=BAY
Logged
Pages: [1]   Go Up
« previous next »