need help from some one with 34 chevy coupe

[racerdad]

i need to know how much room between the engine and the front grill at the bottom were a setrab 920 would go. if there is some one that runs the setrab 920 with the fan pack and a 910 i would love to know if there is room to have them one right in front of the other. thanks cody

[VMS Motorsports]

The clearance, if any, would be minimal due to the width of the 9 series coolers. I would recommend a 920 with a  110 or 119 as a secondary

[Bigmil]

I was told that for all bodies the grill mount should be 3 inches back from the front of the horn and the oil cooler should be 3 inches back from that.  Give or take.

Gerad

[VMS Motorsports]

I was told that for all bodies the grill mount should be 3 inches back from the front of the horn and the oil cooler should be 3 inches back from that.  Give or take.

Gerad

Issue comes in on the 34's with the fiberglass grill surround. It can be cut out for clearance, but they're weak enough as it is. Mine would crack all the time before I switched over to the 37 front end