Hi,
I have a very basic question. I've just bought an older Legend as a toy for track days etc and know little/nothing about the cars, especially as I've never worked on a bike engine before.
When draining the oil, there are three possible outlets - 1. A 'bung' with a hex key pattern on it, slightly below and to the right of the oil leve window. 2. The oil temp sensor, which screws into the sump. 3. A size 17 (I think) bolt on the underside of the sump with what looks like a screw head in the middle of it.
Having pulled out the bung with the hex key insert, I got very little oil coming out - then drained the sump by pulling out the temp sensor.
What is the correct way to do it? I have read the other posts and have pulled the hoses off at the back of the engine and off the oil cooler to drain as much as possible. Would like to know the best practise so I do it correctly the next time.
Sorry my question is so basic - but when you don't know the answer, it becomes a difficult question!
Any info appreciated.
Thanks.