I have gotten a few emails / messages here and there since I started selling these about the solder joint coming loose between the wires and the contact points. Everyone has been understanding and went about re-soldering it back together but wanted to let me know for future improvement.
To be honest this is the weakest link on my assembly, and probably the strongest on the USLC unit
So I went out into cyber space for a stroll and found another piece of hardware to try out
These have a threaded hole at one end and should make for a much stronger solder joint then the smooth hole that I have been soldering into in the screws \ set screws of the last parts.
I do have to turn down at least one of them because of how close three of the contacts are. This will more then likely be the best solution short of ordering custom hardware with some absurd minimum order quantity.
I haven't had a chance to solder wires into them yet, hopefully at some point today?
Andrew