LegendsRacer - Legends & Bandolero Racing Forum
BANDOLEROS => Drivetrain & Gearing => Topic started by: T Worthy on January 25, 2010, 10:00:13 am
-
Using a restrictor plate(red) and gearing 13--59 for3/8 mile tracks came across a problem, 3/4 straightaway hitting the rev limiter(what a drag). Hitting the limiter each lap is not good for the engine. Bando handled very good, no push and stable at limited speed, is there any way known within rules to help with this problem(14/59) or (15/59 )would help NOT IN RULES, any help is apreciated. T. Worthy
-
13/59 is WAAAY too much gear for a red restrictor Bando on a 3/8's; Try 15/56. Also, carb blueprinting for a restrictor and getting engine tuned on a dyno will help tons-- you'll ususally pick up 3-4 HP! Considering you are likely around 12 hp now, getting to 15-16 hp is about a 25%-30% hp increase.
-
who do you recommend for dyno and blueprinting? I am in search of someone
-
The problem is not in the engine or power out put, if any thing it has too much. Here in Texas I have been told that rules to slow bandos(red restrictor plate---and a gear rule 13/59) --Houston motorsports park and Thunderhill in Kyle Tx. both 3/8 mile tracks. I don't mind the redrestrictor plate the gears are the problem. Lap times were great during testing on Sat at Thunderhill, would have been even better if I could have up the gear, would love to be able to go to 15/56. Thunderhill has agreed to 6 Bandolero races in 2010 for drivers and teams to get the required point races. Many thanks to Amy Hogan and team that made this possible. Ya'll come on down to Thunderhil and lets race!