LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => Drivetrain & Gearing => Topic started by: 914racing on May 08, 2023, 11:05:34 pm
-
I was changing gears out from a 342 back to a 373. When I was unscrewing two of the nuts connecting the gear, the stud came out. I am missing two. Is it ok to temporarily fill the holes with a s screw stud to prevent the gear oil from leaking? Would I need to rebuild or replace the axle? Thanks in advance
-
Not sure why you are missing 2. But if they are stripped, you could Helicoil them.
-
Thanks. When I was loosening the nuts, the stud and nut came off as they must have snapped.
-
So the stud is broken? Or did it just come out with the nut?
Steve