LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Engine Care & Tuning => Topic started by: smokinjoe00 on July 12, 2017, 09:40:33 am

Title: valve covers
Post by: smokinjoe00 on July 12, 2017, 09:40:33 am

can a 1200 valve cover fit on a 1250 sealed? I'm assuming yes

Title: Re: valve covers
Post by: fastfred02 on July 12, 2017, 12:12:52 pm

I've heard of people putting the 1250 valve cover on a 1200 so those neat head fans will fit. So, as far as I know, yes.

Title: Re: valve covers
Post by: smokinjoe00 on July 12, 2017, 12:20:47 pm

that's what I thought just wasn't sure, they are a bit different on top

Title: Re: valve covers
Post by: RPM on July 12, 2017, 05:02:18 pm

Yes, the 1200 and 1250 valve covers are the same on the bottom but the valve cover bolts and grommets are different between the two.

Robert - RPM

Title: Re: valve covers
Post by: smokinjoe00 on July 12, 2017, 06:16:06 pm

so no issues by using it Robert?

Title: Re: valve covers
Post by: RPM on July 13, 2017, 03:03:25 pm

Nope as long as you have the proper bolts and grommets for the valve cover. The 1200 VC has a 10mm head bolt with black grommets the 1250 VC has 5mm allen head bolts with green grommets.

Robert - RPM

Title: Re: valve covers
Post by: justfreaky on July 14, 2017, 01:50:56 pm

Joe,

RPM sells the green grommets and may have the allen bolts as well.
;)

Steve

Title: Re: valve covers
Post by: RPM on July 18, 2017, 03:34:02 pm

Yes we have the green grommets and bolts for the XJ cover and we have the black grommets for the FJ cover unfortunately the Fj cover bolts are no longer available from Yamaha. Type in "valve cover" in the search field and they will all pop up on this page https://www.rpmracingca.com/search.asp

Robert - RPM