LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => General => Topic started by: 1934sedan on October 11, 2012, 10:53:39 pm

Title: Digital Gear indicator
Post by: 1934sedan on October 11, 2012, 10:53:39 pm: Hello guys can you tell me what is required to install one of these gauges? How do you install them?

Thanks
Title: Re: Digital Gear indicator
Post by: justfreaky on October 11, 2012, 11:08:53 pm: You will need the 6 wire indicator plate and the digital indicator. I believe you can buy it as a kit from USLC. They are not real cheap. The indicator plate is about $80. You can find a used one once in awhile. You might advertise that you are looking for one. Perhaps someone has one laying around.

Steve
Title: Re: Digital Gear indicator
Post by: VMS Motorsports on October 11, 2012, 11:11:55 pm: Your engine may have the plate on it already, so you may only need the gauge
Title: Re: Digital Gear indicator
Post by: racintaz99 on October 12, 2012, 11:01:10 am: I know the enite kit is around $250 as I had checked into this at the begining of the 2012 season. I just have not had the extra money due to other engine problems that needed to be fixed.

I have been looking for a used one too but I am not having too much luck with that. If you find someone that has more than 1 used, let me know as I am still interested in getting one for this season.

Scott
Title: Re: Digital Gear indicator
Post by: 1934sedan on October 13, 2012, 12:00:33 am: Ok great guys how do you wire it in?
Title: Re: Digital Gear indicator
Post by: Legends57x on October 13, 2012, 08:25:33 am: Very simple...Supply fused 12 VDC supply via red wire and then it's just a matter of plugging 6 wire connector plug from gauge to 6-wire shift sending unit. Make sure to install good O-ring with light coat of oil on sending unit and just snug hand tight sending unit fasteners.

Good luck! ;D
Title: Re: Digital Gear indicator
Post by: 1934sedan on October 13, 2012, 09:52:54 am: Thank you!!
Title: Re: Digital Gear indicator
Post by: phylzub02 on October 13, 2012, 07:09:10 pm: I AM INTERESTED IN A USED GEAR INDICATOR AND THE ASSY FOR THE MOTOR IF ANYONE HAS ONE THEY WANT TO GET RID OF..FRANK @1-208-353-2283
Title: Re: Digital Gear indicator
Post by: justfreaky on October 13, 2012, 08:21:47 pm: I have a digram to build the light part of the indicator; You would still need to get the 6 pin indicator plate.

Steve
Title: Re: Digital Gear indicator
Post by: Racingtrader.ca on October 31, 2012, 04:26:14 pm: Quote from: phylzub02 on October 13, 2012, 07:09:10 pm
I AM INTERESTED IN A USED GEAR INDICATOR AND THE ASSY FOR THE MOTOR IF ANYONE HAS ONE THEY WANT TO GET RID OF..FRANK @1-208-353-2283

I have a brand new one still in the box for 200.00
Title: Re: Digital Gear indicator
Post by: Vern Houseman on November 01, 2012, 05:55:58 am: is it a complete kit ?
Title: Re: Digital Gear indicator
Post by: Racingtrader.ca on November 01, 2012, 02:20:34 pm: Yes it is everything you need, Its still in the packaging from USLC. Its brand new.