LegendsRacer - Legends & Bandolero Racing Forum

BANDOLEROS => General => Topic started by: Bentracin on December 05, 2014, 11:59:22 pm

Title: Bando Wiring Diagram
Post by: Bentracin on December 05, 2014, 11:59:22 pm
Here is a Bando wiring diagram.

http://www.bandostuff.com/images/ban_wiring_1_.gif
Title: Re: Bando Wiring Diagram
Post by: justfreaky on December 06, 2014, 12:17:52 am
Our good friend Ed has some very good info on his site. Most of it is shared here on this site as well.
There is good info on buying and maintaining a bando car. I finally got around to buying his Bando book this year.

Steve
Title: Re: Bando Wiring Diagram
Post by: djratliff on May 19, 2019, 02:38:01 pm
Hello Everyone,

This link seems to be dead.  Does anyone have this diagram?

Thank you,

Dave
Title: Re: Bando Wiring Diagram
Post by: justfreaky on May 19, 2019, 07:49:22 pm
Not sure what happened with  Bandostuff.com. I was able to access it a few months back. I'll have to see if I can remember how I did it.
Title: Re: Bando Wiring Diagram
Post by: justfreaky on May 20, 2019, 09:25:50 am
Hopful that this will help you

Title: Re: Bando Wiring Diagram
Post by: djratliff on May 27, 2019, 03:26:19 pm
 Thank you.

One question, where does the kill switch wire off the engine go? 
Title: Re: Bando Wiring Diagram
Post by: justfreaky on May 27, 2019, 08:17:03 pm
I really do not know. I assume to ground.
Title: Re: Bando Wiring Diagram
Post by: Legends57x on May 28, 2019, 10:47:19 am
DJ,

All small air cooled engines have a grounding tab of some sort attached to the ignition coil(s) which serves as the kill point to shut down the engine. It is normally a black colored wire that will need to be attached to the kill switch on your car. Other side of the kill switch should go to a chassis ground. Think of the kill switch box in the provided diagram as the ignition coil on the engine.

Hope this helps!