LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => General => Topic started by: thunder938 on June 23, 2009, 12:36:37 pm
-
From Knox Racing the Ohio 600 Dealer:
2010 Bassett / Unique as sold by 600 racing will be the only wheel permitted. Per 600 racing today. (6/23/2009)
Dave
-
Are they only allowing ones with a sticker, or just a specific model? The same ones 600 sells are less expensive through just about any other supplier.
-
Legends Car Approved Beadlock Wheel
The INEX approved (and marked) beadlock wheel will be permitted to be used on the right rear corner of Legends Cars running on INEX sanctioned tracks.
This wheel will have clips for wheel covers. The only wheel cover permitted will be as delivered by 600 Racing, Inc.
The approval of use of this wheel will also rescind the approval for use of screws in our current wheels. Using screws to secure the tire to the wheel will no longer be permitted.
Other aftermarket beadlock wheels & covers will not be allowed. Only the INEX approved beadlock wheel with the identifying sticker & stamp and cover as delivered by 600 Racing, Inc. will be legal for use at all INEX sanctioned races (right rear only).
Painting the wheel will be permitted. However, powder coating, chrome, etc. will not be allowed (the identifying sticker must remain intact & identifiable).
-
The new bead lock wheels that 600 sells are fine, but all other wheels will have to be the Bassett / Unique that 600 sells. I have to buy 8 new ones for next year...
-
CLARIFICATION
Just got off the phone with Jason Foxworthy, 600 racing parts director:
Bassett or Trap wheels only, which are the 2 brands 600 sells. No other manufacturer (Aero, Diamond, Marsh, etc...). Wheels do not have to be purchased through 600, and will not have any INEX or 600 stickers or markings...just have to be Bassett or Trap.
This has been a public service announcement from VMS Motorsports...relax everybody!
I would assume this is because of all the lighter wheels out there people are using. this will be a quicker and easier way than to pull peoples wheels off in tech and weight them.
-
Jim,
Thanks for checking into this. My blood pressure just went back down a little. At least I have the Trap wheels, but feel bad for racers using the other brands that are within the legal weight.
-
Must say, if they are going to make changes like this, I'm glad that they did it this early. All I have are Bassets and Traps, but was thinking of having Diamond make me some, playing with the variable allowed in the rules for offset. Now I can buy my daughter a birthday present after all ;D
-
Jim, a cheater like me could still take some Bassett stickers and put them on my light weight wheels so you should probably still weigh them. ;)
-
this kinda sucks I just bought 8 new aero wheels ......
-
Im sure you can find Basset stickers somewhere, you can still get 1250 engine seals on the black market I hear :-X
Way to throw the race on Saturday to keep everybody guessing Jeff!
-
we will be making Bassett sticker and selling them for $75 a piece. Each sticker will come with a wheel. Just kidding but we could copy the stickers pretty easy.
Scott 77w
-
I will have Legends Nation radio on this week.
Wondering if Regan and all the wheel people will show
This could be interesting
----- Gimpster -----
-
Unfortunately, the wheel people aren't the ones making the rules.
They are the ones making the deals with 600 Racing. :o
Steve
-
Sometimes it is fun to stir the pot though ;D
----- Gimpster -----