LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => General => Topic started by: Oldtimer1 on March 30, 2013, 06:58:33 pm
-
I have a chance to buy a nice Snap On compression tester but I need to know if it comes with the right size adapter first. Thanks
-
NGK spark plugs that are normally used in Legends Yamaha engines are 12 mm thread. See link below...
http://www.summitracing.com/parts/NGK-2202/
-
Thanks.
-
This is what I'm looking at, best he'll go is $90 for both units.....hopefully the pics will work.
-
Harbor Freight unless you're stuck on a particular brand name
-
Bought digital tester from McMaster-Carr as listed in link below. Includes 12 mm adapter. Nice tester - works great.
http://www.mcmaster.com/#compression-engine-testers/=m4gfxv
$90 for both of the Snap-On units sounds like a good deal too. You may want to contact a Snap-On dealer first for cost if 12 mm adapter is not included. BTW - Caution when using the leakdown tester. We have used them for years where I work and have had mixed results with what the readings really mean or if there really is a problem.
-
The Snap On compression test come with a 12mm adapter so that's a plus, I'm going to roll the dice and wait until Friday and offer him $80.
-
Lots of different BRAND NAMES out there. Sometimes it depends on your budget.
I've bought some off brands that do just as well as the expensive stuff. Do a little shopping around!
Steve
-
Hell i would scoop that one up, $90.00 for snap on stuff? I believe for the adapter hose itself i paid $40.00 from the snap on dealer.
Dan