LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Drivetrain & Gearing => Topic started by: justfreaky on May 04, 2010, 05:07:03 pm

Title: Some Useful 10 Bolt Info
Post by: justfreaky on May 04, 2010, 05:07:03 pm

I want to put together a useful 10 bolt info to post as a stickie. Anyone that can add part #s, specs, etc... Please Post
Thanks,
Steve

Fel-Pro gasket numbers
10 Bolt RDS27413 ~cost $2.60


10 Bolt = T code = 6.7
M86610 cup
M88610 cup
M86649 cone
HM88649 cone
Pinion seal 1176

 U Joint for 10 bolt rear PRECISION Part # 394
 slip yoke part # precision # 437G
 
Torque spec’s
0.006 – 0.009 back lash for gears.
Ring gear torque 55 ft/lbs
bearing caps 60 ft/lbs

Title: Re: Some Useful 10 Bolt Info
Post by: VMS Motorsports on June 04, 2010, 06:28:17 am

I dont know the part number, but it makes life alot easier if you get the crush sleeve when rebuilding one

Title: Re: Some Useful 10 Bolt Info
Post by: slack11 on March 08, 2014, 11:47:27 am

Couldn't find an answer on here....anyone know the part number for the crush sleeve for these rear ends?

Title: Re: Some Useful 10 Bolt Info
Post by: VMS Motorsports on March 08, 2014, 12:10:25 pm

I have rebuild kits in stock, can break one up for the crush sleeve if that's all you need. $8.50 + shipping, which would be around $3.00

Title: Re: Some Useful 10 Bolt Info
Post by: Vern Houseman on March 09, 2014, 10:16:44 pm

Jim are the MAN