LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => Drivetrain & Gearing => Topic started by: Shawnben on December 28, 2007, 12:07:29 pm
-
Need a new driveshaft flange. The part of the driveshaft that bolts to the rear end. Does anyone know what part # or what vehicle this would be from? Also a part number for a good universal joint. thank you Shawn
-
The driveshaft is made up from parts for a PTO drive shaft. Any local drive line shop should be able to help you out. I am not sure if any parts are available from 600 racing but i am sure that some dealers will source and stock parts elsewhere. Little Racecars in Virginia would have the parts.
Geoff
-
I'm going with Geoffs' suggestion about checking with Little Race Cars.
http://www.littleracecars.com/
I did a search on 600 Racing, and could not find the part you are looking for.
Sorry! :-[
Steve
-
Yes, Mike at LRC has helped me with the same thing. He is a very nice guy, and very helpful.
-
Shawn the driveshaft is availible from 600 racing here is the link however you have to call to order it the online buying doesn't work. Email Jeff at the aprts department at 600 jfoxworthy@600racing.com
http://store.600racing.com/site/product.cfm?id=20C063B6-B0D0-791A-65A7AA01EBCA8A38&dept_id=622E1E39-B0D0-791A-65B23BFDCCF3BDC3
Mike,
Cherokee Racing
-
If you check eBay, there is one on there right now.
Steve
Sorry I didn't include link!
Search Legends Race Car
-
I got the part from LRC. Very helpfull people. I went to every drive train shop in my area and they couldn't match anything up. I think it's a toyota part. Thanks for the help. Shawn