LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Drivetrain & Gearing => Topic started by: cmac48 on May 04, 2008, 06:46:20 pm

Title: Rear end specs?
Post by: cmac48 on May 04, 2008, 06:46:20 pm

can anyone provide me with tourque specs for rear end, ie bearing preload,  cover tourque. I guess something complete for rear ends.

thanks.

Title: Re: Rear end specs?
Post by: cmac48 on May 05, 2008, 02:38:44 pm

If  there is a link somewhere, it would be greatly appreciated.

Title: Re: Rear end specs?
Post by: DARK AGE 53 on May 05, 2008, 09:07:02 pm

I'm not going to be able to help you much but hears an idea, check to see if you can find a Haynes shop manual for 76 /81 Toyota Corolla/Celica at your local AutoZone or book store.

Later,
Al

Title: Re: Rear end specs?
Post by: justfreaky on May 06, 2008, 03:31:30 am

 Good advice Al.

 I have seen a post somewhere, but it may take me some time to find it.
I'll keep searching.

Steve

Title: Re: Rear end specs?
Post by: cmac48 on May 06, 2008, 08:33:50 am

Thanks Guys, I really appreciate the help. I'll look for a manual as well,
Steve, if you do find something, I'd be greatful.

Title: Re: Rear end specs?
Post by: justfreaky on May 06, 2008, 12:56:47 pm

Torque spec’s

0.006 - 0.009 back lash for gears.
Ring gear torque 55 ft/lbs
bearing caps 60 ft/lbs


 I knew I had them somewhere.  :)


Steve

Title: Re: Rear end specs?
Post by: cmac48 on May 07, 2008, 09:03:08 am

Thanks Steve, that is great, sure helps me a lot.