LegendsRacer - Legends & Bandolero Racing Forum

BANDOLEROS => Drivetrain & Gearing => Topic started by: Bando9 on May 11, 2010, 05:50:06 pm

Title: Lock on axle
Post by: Bando9 on May 11, 2010, 05:50:06 pm

Ok i don't know were to put this so i going to put it hear.

I have a problem with one of my locks on the axle. Every time i spin out or get realy loose the lock comes loose. Then the chain goes out of line like the last time i spun out and the chain tour the teath out of my clutch. It came loose once and we tightened it up then the next race it did it agine. Any help that would be great.

Chance ;D

Title: Re: Lock on axile
Post by: rob on May 11, 2010, 06:27:30 pm

Chance
sometimes the locking bolt will strip out at the bottom and not grab enough to pull it tight.
I have always used locking collars on both sides, they will also keep you from losing the keyway stock.
Hope this helps
Rob

Title: Re: Lock on axile
Post by: Bando9 on May 12, 2010, 05:10:10 pm

It helps a lot you don't need to hope lol I will try that thanks

Chance  8)

Title: Re: Lock on axile
Post by: bandostuff.com on May 12, 2010, 11:22:00 pm

Use two collars  side by side on the inside of the left bearing retainer.  Sometimes the axle will slip there.

Title: Re: Lock on axile
Post by: Bando9 on May 14, 2010, 04:49:31 pm

ok thanks to all