LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => Lubrication => Topic started by: ZForceRacing01 on July 06, 2016, 07:27:23 pm
-
I have a leak on my oil cooler. Standard Setrab 3 pass. Leak started slow, but is now unraceable. Can a radiator shop repair these things, I don't see why not. This thing has never been damaged from a wreck, it just started leaking for no reason.
-
Hi John,
I would think the radiator shop should be able to repair it and then pressure test it for you after the repairs. That would be my first stop.
Steve
-
I have had two of the Setrab oil coolers over the past five years of my Legends racing and both developed leaks near base mounting plates. These coolers are not user friendly for racing as they seem to fatigue due to vibration and stress as they are solid mounted for the most part. I even used extra long threaded rod with spacers to capture both top and lower mounts, but had same result. I have since switched over to the Fluidyne double pass oil cooler(available at Summit Racing for <$220), mounted it with rubber grommets and never had further oil leak issues. Fluidyne cooler is a much more robust design and better cooling IMO. As far as your original question, I have not heard of anyone repairing the Setrab coolers. Due to the nature of oil passing thru it, I would think it would have to be thoroughly flushed with solvent, allowed to air dry for some time, before attempting to repair. Not worth the risk in my mind. Good luck!
-
Legends57x-- Do you have a part number for that at Summit?? Thanks!
-
Summit Racing Part Number: FLD-DB-30317-RTF $217.55 free shipping & handling. Hope this helps! ;D
-
Thanks!!
-
I am going to check into getting a fluidyne cooler but I do have an answer on the fixing the leaking cooler.
They cannot be fixed, I guess oil is too deep into the pores of the aluminum. I guess this prevents and patchwork that can be done.
-
If you use rubber mounts with the Setrap, you won't have leak with them either. It's the vibration. I believe the instruction to use some sort of rubber mount
Robert
-
Never had a Setrab leak in 9 years of dirt racing. Mount them correctly to isolate vibration as instructed and they are fine