LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => General => Topic started by: 1934sedan on January 11, 2013, 08:52:50 pm
-
Hi guys I am going to be installing a set of top head cooling fans, where do you recommend getting the power from ? On the car
Thanks
-
I connected our to the switch for main fan, but have a plug to disconnect them when I take the hood off.
Robert
-
i do not trust running all that load threw a switch i run a relay to the fans and use the fan switch to turn on the relay.. had some bad luck with the heavy duty 20 amp switches overheating..
joe
-
add another switch if you're concerned.
Robert
-
i do not trust running all that load threw a switch i run a relay to the fans and use the fan switch to turn on the relay.. had some bad luck with the heavy duty 20 amp switches overheating..
joe
Joe,
What relay are you using for your fans? Do you have a link to the relay?
I think the relay is the way to go. Just not sure what realy I need.
Steve
-
Joe,
What relay are you using for your fans? Do you have a link to the relay?
I think the relay is the way to go. Just not sure what realy I need.
Steve
Steve,
Here you go;
30 amp Relay (http://www.rpmracingca.com/proddetail.asp?prod=5PinRelay)
Relay Socket (http://www.rpmracingca.com/proddetail.asp?prod=RelaySocket)
Randy - RPM
-
Thanks Randy! Guess I just missed that on your site. :-[
Steve
-
yes just like that one.. you will only use 4 of the pins... ground, battery power, switch power and output to fans. [ i hook in the two upper fans and the cooler fan].
joe
-
Randy,
Ordered. Thanks!!!
Steve