LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => Setup and Handling => Topic started by: KK300622 on November 03, 2007, 03:52:31 pm
-
Could someone please tell me a recommended torque setting to use when torquing wheels on a Legends Car? Thanks.
-
I use 90 to 100 foot pounds.
Geoff
-
Thanks, I was thinking 90 - 100 foot pounds was a good setting but I wasn't totally sure about it.
Kyle
-
Hello, The studs are metric, 12 x 1.5, they should be torgued to 75 foot pounds. 1/2 studs are 100, and just so you know those old 7 / 16 studs are 65. Those specs are from when I sold wheels and tires for years. The makers on the studs, wheels, and tires had those settings.....
Thanks,
Dave, Northern Ohio Legends
-
75 ft./lbs here.
-
I run 75 foot punds as well
-
70-75 here in So. Cal
Use to go up to 95 and was ruining rims, threads and lugs
-
65 foot pounds is more than enough.