LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Engine Care & Tuning => Topic started by: legend7 on November 27, 2013, 09:08:47 am

Title: carb jetting
Post by: legend7 on November 27, 2013, 09:08:47 am

I'm re jetting a stock bike carb with a din.jet kit .... would anyone chime in and help me out with what jets and clip placement on the needles to start with... thanks

Title: Re: carb jetting
Post by: knoxracing on November 27, 2013, 09:33:00 am

What part of the country are you in?

Title: Re: carb jetting
Post by: legend7 on November 27, 2013, 09:56:42 am

Hey dennis.... I'm in michigan

Title: Re: carb jetting
Post by: knoxracing on November 27, 2013, 11:04:41 am

Main jet 117 or 120 (depends on weather) I see most guys with the 117 in our climate.
155 air jet
40 pilot
needle clip is on the third from the top. (third one down)

Dynojet

Title: Re: carb jetting
Post by: legend7 on November 27, 2013, 03:16:34 pm

thank you much... I'll start with that.   

Title: Re: carb jetting
Post by: riptide60 on February 06, 2014, 05:22:24 pm

D.jet needle needs 122.5. 117.5 is to lean. If you really want yo know the facts call my carb guy hank scott he's the best with these motors and carbs without a doubt. www.Realracecars.com