LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => Brakes => Topic started by: Legend732 on March 19, 2018, 02:15:43 pm
-
Still learning these cars. Having a problem when I hit the brakes on entry or even center of turn (at times when I need to) and the front wheels are locking up. I have most of the bias on the front with a little rear. I have gone to a less aggressive pad (wildwood brakes) and still having the problem. I have been told to have limited rear brakes as the car will push. Am I hitting the brakes to hard? Is there anything I can do with the brake system to help not do this? Seems like I should be able to hit the brakes and not locked the front wheels up. Any insight would be great.
-
Sounds like too much front brake bias to me. Front brakes should be about 70% (more or less) of your braking.
Make sure that your calipers are square to the rotors though.
Steve
-
Thanks for the quick reply. I will try this next time out.
-
Do check those calipers and make sure they are square to the surface of the rotors. Sometimes, they require a little bit of shimming to get them into place.
Steve
-
Will do, thanks Steve
-
What are you running for front pads?
-
I am out on business, I will get back with you. Thanks