LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Engine Care & Tuning => Topic started by: DARK AGE 53 on June 27, 2007, 06:40:17 pm

Title: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on June 27, 2007, 06:40:17 pm

Looks like a good tool to have with these cars, www.carbtune.com .

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: justfreaky on June 27, 2007, 08:36:21 pm

Hi Al,

 Sorry, have been busy and not on the computer much.

 My brother used a gauge similar to that when he was working on bikes and snowmobiles. As far as I remember, it was just a matter of getting each one to read the same.
 Know that's not much help, but I think it would work better than some of the cheaper units.

 Good Luck!

 Steve

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on June 28, 2007, 02:05:56 am

Hey Steve,

From what I've read on the net the Morgan CarbTune II meter sounds well worth the money, around here it could cost you anywhere from $50-$100 to get your carbs synchronized....you can buy the Morgan CarbTune II for $100+shipping. Any info you can get from your brother would be appreciated.

Later,
Al

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: gramps05 on June 28, 2007, 09:53:20 am

Been using one for two years, excellent unit and you don't have to worry about spilling the mercury out of the tubes that is used in other units

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on June 28, 2007, 12:11:18 pm

Quote from: gramps05 on June 28, 2007, 09:53:20 am

Been using one for two years, excellent unit and you don't have to worry about spilling the mercury out of the tubes that is used in other units

Thanks for the reply, how about some info on how you use it. Thanks

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on June 28, 2007, 12:14:52 pm

also, where did you buy your Morgan CarbTune from.

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: gramps05 on June 29, 2007, 08:06:33 am

The unit uses 4 stainless rods instead of mercury in tubes, the 4 lines are attached to the vacuum ports located behind the carbs,with engine running you sync carbs 1 and 2 then 3 and 4 and then sync the two pairs together. I purchased mine thru the mail from England. Check out this site, this is where I got mine from.        http://www.carbtune.com/

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on June 29, 2007, 08:16:31 am

do you think this place would be just as good price wise http://www.casporttouring.com/store/merchant.mvc?store_code=CST&screen=CTGY&category_code=MorganT ?

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: gramps05 on June 29, 2007, 07:15:57 pm

Looks good to me.....

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on July 02, 2007, 02:52:22 pm

The place in Cali was out of stock so we ordered it from carbtune.com .

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: justfreaky on July 02, 2007, 03:51:47 pm

Hi Al,
 Let everyone know how this works out for you. Give us all a site to track your progress.

 Best Wishes

 Steve

Title: Re: Anyone here use a Morgan CarbTune II Synchronizer?
Post by: DARK AGE 53 on July 02, 2007, 07:48:39 pm

Hey Steve,

I hope to learn more about the Carbtuner before giving it a try, I'll pass along any and all info I can.

Later,
Al