LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => General => Topic started by: Steve35897 on May 03, 2020, 02:02:44 pm

Title: I need information about the bulkhead connector
Post by: Steve35897 on May 03, 2020, 02:02:44 pm

Does anyone have a source for replacement bulkhead connector? My tach signal is not making contact from the engine side to the dash. I don't want to buy a new wiring harness just a new connector or new pins for the connector. Thanks Steve

Title: Re: I need information about the bulkhead connector
Post by: justfreaky on May 03, 2020, 07:00:22 pm

Have you tried the parts stores or automotive electrical places. You might also try eBay.

Steve

Title: Re: I need information about the bulkhead connector
Post by: Steve35897 on May 03, 2020, 07:07:48 pm

I have looked on ebay but without enough info to know what to search for I have not found anything.   For now I have the problem solved. I realized there are several spare connections. But in the future I would like to find replacement pins.

Title: Re: I need information about the bulkhead connector
Post by: Steve35897 on May 05, 2020, 11:39:52 am

I found a description and part number if anyone is interested. The male side is TE CPC Connector 14 Pin 206044-1 and the female side is TE 206043-1. Those are just the housing the pins and sockets are seperate.

Title: Re: I need information about the bulkhead connector
Post by: justfreaky on May 05, 2020, 07:02:41 pm

Thanks for the heads up!

Steve

Title: Re: I need information about the bulkhead connector
Post by: blakeborchers65 on May 14, 2020, 09:59:14 pm

I?m having issues also. The person who rebuilt this car decided not to run the warning lights and flush cut them on the inside female side of the connector. I can not figure out how to get the pin out so I can put new wiring in. Any help would be great.

Title: Re: I need information about the bulkhead connector
Post by: justfreaky on May 15, 2020, 11:24:54 am

All kinds of pin removal tools out there. Here is a good selection on Amazon: https://www.amazon.com/electrical-pin-removal-tool/s?k=electrical+pin+removal+tool

Title: Re: I need information about the bulkhead connector
Post by: blakeborchers65 on May 28, 2020, 01:20:19 am

yeah I tried pin removal tools and could not get the pins to release just wondering if anyone had the same issue