LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Engine Care & Tuning => Topic started by: Gunnar1778 on February 17, 2021, 10:31:27 am

Title: Shifter Linkage
Post by: Gunnar1778 on February 17, 2021, 10:31:27 am

I broke my shifter linkage a few months ago and finally got to putting it back together. Does the final piece of the linkage that connects to the spline connect at an angle or should it be straight up or down? It seems to be binding up when I connect it and try to shift.

Title: Re: Shifter Linkage
Post by: justfreaky on February 17, 2021, 01:52:11 pm

Splined linkage should be at a little angle.
Might have to slide it off and move a little to get it right.

Steve

Title: Re: Shifter Linkage
Post by: Gunnar1778 on February 17, 2021, 07:36:24 pm

Would you be able to send a picture of what it should look like for reference?

Title: Re: Shifter Linkage
Post by: justfreaky on February 17, 2021, 08:06:47 pm

Unfortunately, I don't have a good pic for you. Try moving the lever (splined part) 1 spline either way and see if it is better or worse. If worse; Move 2 splines the other direction. Once you are fairly close; Use the heims to dial it in.

Steve