As before, this is where I am keeping the list of members that would like one of my kits\parts
New posts about round two will start at post #2 here
Full kit list
Names in Green are from the last list.
1. Vern Houseman
2. NCSU_racer ~ confirmed interest
3. AKRACER
4. RacerRon ~ confirmed interest
5. rickmiller48
6.
7.
8.
vince6b
dirtracer68
canabl
Sending unit only
1.rickmiller48
2.svtmatt ~ confirmed interest
3.
chris mckinney
Gauge only
1. s10custom ~ confirmed interest
Shipped
1. vern houseman <.:.:.:.:.:.:.:.:.:.> shipped 2 pre-production kits (in talks for a third kit)
2. Guy from Washington @nationals ( Dennis I think ???) <.:.:.:.:.:.:.:.:.:.> First round production kit
3. Legends16 <.:.:.:.:.:.:.:.:.:.> First round production kit
4. N4Racing <.:.:.:.:.:.:.:.:.:.> First round production kit (W\ 7th hole pluged)
5. VMS Motorsports <.:.:.:.:.:.:.:.:.:.> First round production kit
6. Shane Chippindale <.:.:.:.:.:.:.:.:.:.> First round production kit (sent to the land down under)
Install Info
- Here is a link to a PDF of 600's install instructions. I will eventually get around to making my own version with pictures, but since I do not have a car it might be awhile!
- Steps 1-4 do not apply as my gauge is a different size
https://docs.google.com/file/d/0B_z-RbT1F5xWX2F2Q3lNaURCcVE/edit?usp=sharing (https://docs.google.com/file/d/0B_z-RbT1F5xWX2F2Q3lNaURCcVE/edit?usp=sharing)
- Here is the version I will now be shipping with the kits, it has steps 1 & 2 struck out
https://drive.google.com/file/d/0B_z-RbT1F5xWODRyd2NXT0NYNW8/edit?usp=sharing
- For the gauge you will need to make a 1 5/16" hole
Link to first round thread
http://www.legendsracer.com/index.php?topic=2945.0 (http://www.legendsracer.com/index.php?topic=2945.0)