LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Drivetrain & Gearing => Topic started by: sciarroni25 on January 18, 2009, 01:45:25 pm

Title: 3rd member storage
Post by: sciarroni25 on January 18, 2009, 01:45:25 pm

anybody know of something out there that stores a legends 3rd member???     i.e. a certain size bucket or something??  A 3 gallon pale always worked for my 9" rearends and now Im looking for something to put my legend 3rd members in..

thanks
dave

Title: Re: 3rd member storage
Post by: justfreaky on January 18, 2009, 01:48:39 pm

Hi Dave,

Big topic as of recent. Try the thread right below yours.

http://www.legendsracer.com/index.php?topic=787.0

Steve

Title: Re: 3rd member storage
Post by: legcar89 on January 31, 2010, 07:18:29 pm

Hi
I used some of my bent rear housings. I cut the bent tubes off  both sides of the center sections and welded the two housings together.   Then I welded some 3 inch angle to the outside ends of the housings to stabilize the center sections.. You can weld as many housings together as you want and make a rack for all of your rears.

Title: Re: 3rd member storage
Post by: justfreaky on February 04, 2010, 04:30:05 pm

Good way to use those bent housings.  ;)
Thanks for the input!

Steve

Title: Re: 3rd member storage
Post by: racer48j on April 21, 2010, 08:53:09 pm

Hi Dave,
You could build a box like the one in this picture to store those extra third members,


I saw this one at http://www.austinlegends.com/ (http://www.austinlegends.com/)
They will sell them to you for $35 if you prefer.

Title: Re: 3rd member storage
Post by: VMS Motorsports on April 21, 2010, 09:16:45 pm

Or, as mentioned, you could go to this thread...

http://www.legendsracer.com/index.php?topic=787.0 (http://www.legendsracer.com/index.php?topic=787.0)