LegendsRacer - Legends & Bandolero Racing Forum
LEGENDS => Drivetrain & Gearing => Topic started by: s10custom on February 23, 2012, 02:21:55 pm
-
Cannot my car to shift into 2,3,4, or 5. Will go into 1 and. Neutral without any problems. Is there anything I can check/do without pulling the motor?
Thanks,
Robert
-
Make sure the shifter linkage is not hitting the driveshaft adapter.
Benn there, done that
-
Yes check the shift linkage i'd say you need to adjust the adapter on the spline off the motor.
Dan
-
Thanks guys. I was really starting to stress over this. I adjusted the linkage and wahla it works!!!!
Thanks again,
Robert