LegendsRacer - Legends & Bandolero Racing Forum

LEGENDS => Setup and Handling => Topic started by: cody90 on January 20, 2009, 09:22:02 pm

Title: auburndale speedway springs?
Post by: cody90 on January 20, 2009, 09:22:02 pm

I'm new to legend cars and i was wondering if someone could point me in the right direction in what springs i showed use at auburndale speedway perferably 8 inch springs would be good 

Title: Re: auburndale speedway springs?
Post by: justfreaky on January 20, 2009, 10:18:26 pm

Anyone racing in Florida that can answer Cody's question?


Cody,

 I went to their website, but could find no info on the track. Even the pic of the track would not load.
Got any info on the track for us?

Steve

Title: Re: auburndale speedway springs?
Post by: cody90 on January 21, 2009, 09:11:38 pm

Yea sure i haven't been there thats why i'm asking but what i do know is that its a 1/4  mile track and the gear they use is a 390

Title: Re: auburndale speedway springs?
Post by: JGRacing on January 22, 2009, 11:22:25 am

According to ChasinRacin.com it is a semi-banked quarter mile paved track. 

http://www.chasinracin.com/track-locator/rtl_search.php?action=1&state=fl&trktag=aub

Title: Re: auburndale speedway springs?
Post by: RickyBobby on January 22, 2009, 11:36:07 am

For that track then here is what I would start with.  This is based on my experiences with semi banked asphalt tracks.
LF 250 RF 275
LR 185 RR 200

Title: Re: auburndale speedway springs?
Post by: justfreaky on January 22, 2009, 11:42:30 am

Thanks JG and RB!
I knew you guys would have a better answer.  ;)

Steve

Title: Re: auburndale speedway springs?
Post by: IraceLegends77 on January 22, 2009, 01:16:38 pm

and put about 49% cross in the car to start with. You might need more to get the car to rotate in the middle of the turn.