Author Topic: More On SS Line (Read 37027 times)

rob · « **Reply #45 on:** February 08, 2009, 02:55:51 pm »

Jegs 10'

http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&N=0&Ntt=865-29310&Ntk=all&Nty=1&D=865-29310&Ntx=mode%2Bmatchpartial&Dx=mode%2Bmatchpartial&searchTerm=865-29310

Sagermotorsports · « **Reply #46 on:** February 08, 2009, 03:57:07 pm »

Thanks for the link !!!

Brett

Sagermotorsports · « **Reply #47 on:** February 08, 2009, 04:03:03 pm »

What does everyone think of those anodized spectre hose clamps? worth the money?

Brett

Racinjj · « **Reply #48 on:** February 08, 2009, 04:36:25 pm »

You will need at least 9' of fuel hose for one car. 25' was just enough for three cars. And yes 5/16" is what you need.

Vern Houseman · « **Reply #49 on:** February 08, 2009, 06:52:49 pm »

is anyone using 3/8 line ?

Sagermotorsports · « **Reply #50 on:** February 08, 2009, 08:00:48 pm »

I did a test fit of 3/8 and it just seemed to sloppy, I would rather squeeze a 5/16 over the fuel cell than to have a loose fit on everything else.
But that is just my opinion, maybe somebody with a little more experience has a better answer

Brett

thunder938 · « **Reply #51 on:** February 08, 2009, 08:45:14 pm »

just use the 5/16, it will be tight on the fuel cell but remember the carb inlet is very small..

justfreaky · « **Reply #52 on:** February 08, 2009, 09:15:53 pm »

5/16" LINE
3/8' is too large.

JGRacing · « **Reply #53 on:** February 09, 2009, 11:05:02 am »

Price wise Summit and Jegs were pretty much the same for the braided line. They had the best deals that I could find for 5/16 line.

So is everyone just cramming the 5/16 line over the 6AN push on fitting at the fuel cell? I was trying to figure that one out over the weekend and was not sure if the hose might split over time from being stretched.

Vern Houseman · « **Reply #54 on:** February 09, 2009, 11:25:09 am »

just take a heat gun and heat it up a little............ a little .....then it will slip on just fine...

Racinjj · « **Reply #55 on:** February 09, 2009, 05:35:44 pm »

Or just get a -6 female to 5/16" hose barb fitting, thats what I have on my cars.

JGRacing · « **Reply #56 on:** February 09, 2009, 06:12:50 pm »

I was having trouble finding that fitting for under $25. Where did you find your's?

IraceLegends77 · « **Reply #57 on:** February 12, 2009, 06:21:26 am »

Do you have to have the SS on both sides of the fuel pump or just the one that goes forward? Got mine in and going to put on tonight.

Scott

thunder938 · « **Reply #58 on:** February 12, 2009, 08:19:03 am »

The S/S line must go all the way back to the FUEL CELL....

VMS Motorsports · « **Reply #59 on:** February 23, 2009, 11:38:12 am »

Finally ordered my fuel line today. While Jegs and Summit had the identical and best prices ($24.95/10ft.), Jegs boasts "free" shipping, but a $9.95 handling fee and a $2.40 "out of the way" shipping upcharge...Summit charged $4.50 flat shipping and thats it. Here's the Summit link...

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPE%2D29310&N=700+115&autoview=sku

LegendsRacer - Legends & Bandolero Racing Forum

News:

Author Topic: More On SS Line (Read 37027 times)

rob

Re: More On SS Line

Sagermotorsports

Re: More On SS Line

Sagermotorsports

Re: More On SS Line

Racinjj

Re: More On SS Line

Vern Houseman

Re: More On SS Line

Sagermotorsports

Re: More On SS Line

thunder938

Re: More On SS Line

justfreaky

Re: More On SS Line

JGRacing

Re: More On SS Line

Vern Houseman

Re: More On SS Line

Racinjj

Re: More On SS Line

JGRacing

Re: More On SS Line

IraceLegends77

Re: More On SS Line

thunder938

Re: More On SS Line

VMS Motorsports

Re: More On SS Line