Author Topic: Gearing with MT09  (Read 8761 times)

Offline Aus1002Legendracer

  • Newbie
  • *
  • Posts: 1
Gearing with MT09
« on: April 29, 2024, 08:16:17 am »
We recently changed out our 1250 with the new MT. With the 1250 on a 3/8 dirt oval we ran a 3.58 gear. On a 1/4 mile oval we ran a 3.73 gear. My question is with the new MT can we run the same gear or do we need different ones. Thanks for any help




Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4520
Re: Gearing with MT09
« Reply #1 on: April 29, 2024, 02:26:47 pm »
FZ09                  
REAR GEAR   Ratio   ENGINE GEAR       REAR GEAR   Ratio   ENGINE GEAR
                  
430   19.278   1st      373   8.652   4th
410   18.381   1st      430   8.601   5th
390   14.485   1st      250   8.405   2nd
373   16.709   1st      358   8.317   4th
358   16.063   1st      410   8.201   5th
342   15.315   1st      293   7.982   3rd
333   14.943   1st      342   7.9301   4th
330   14.826   1st      390   7.801   5th
430   14.456   2nd      333   7.737   4th
410   13.784   2nd      330   7.677   4th
293   13.149   1st      430   7.495   6th
390   13.111   2nd      373   7.455   5th
373   12.53   2nd      358   7.167   5th
358   12.046   2nd      410   7.147   6th
430   11.702   3rd      341   6.833   5th
342   11.484   2nd      293   6.808   4th
250   11.208   1st      250   6.803   3rd
333   11.205   2nd      390   6.798   6th
410   11.158   3rd      333   6.667   5th
330   11.118   2nd      330   6.615   5th
390   10.614   3rd      372   6.496   6th
373   10.143   3rd      358   6.245   6th
430   9.982   4th      341   5.954   6th
293   9.86   2nd              293   5.867   5th
358   9.751   3rd      333   5.81   6th
410   9.517   4th      250   5.803   4th
342   9.296   3rd      330   5.764   6th
333   9.07   3rd              293   5.112   6th
390   9.053   4th      250   5.001   5th
330   9.0001   3rd      250   4.357   6th
Better to be hated for who you are, Than to be loved for who you are not.