« previous next »
Pages: [1]   Go Down

Author Topic: 10 bolt - missing 2 from gear change  (Read 17955 times)

Offline 914racing

  • Newbie
  • *
  • Posts: 2
10 bolt - missing 2 from gear change
« on: May 08, 2023, 11:05:34 pm »
I was changing gears out from a 342 back to a 373.  When I was unscrewing two of the nuts connecting the gear, the stud came out.  I am missing two.  Is it ok to temporarily fill the holes with a s screw stud to prevent the gear oil from leaking? Would I need to rebuild or replace the axle? Thanks in advance
Logged


Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4520
Re: 10 bolt - missing 2 from gear change
« Reply #1 on: May 09, 2023, 05:26:53 pm »
Not sure why you are missing 2. But if they are stripped, you could Helicoil them.
Logged
Better to be hated for who you are, Than to be loved for who you are not.

Offline 914racing

  • Newbie
  • *
  • Posts: 2
Re: 10 bolt - missing 2 from gear change
« Reply #2 on: May 09, 2023, 09:03:48 pm »
Thanks. When I was loosening the nuts, the stud and nut came off as they must have snapped.
Logged

Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4520
Re: 10 bolt - missing 2 from gear change
« Reply #3 on: May 10, 2023, 11:30:11 am »
So the stud is broken? Or did it just come out with the nut?

Steve
Logged
Better to be hated for who you are, Than to be loved for who you are not.
Pages: [1]   Go Up
« previous next »
 

anything