LEGENDS > Drivetrain & Gearing

10 bolt - missing 2 from gear change

(1/1)

914racing:
I was changing gears out from a 342 back to a 373.  When I was unscrewing two of the nuts connecting the gear, the stud came out.  I am missing two.  Is it ok to temporarily fill the holes with a s screw stud to prevent the gear oil from leaking? Would I need to rebuild or replace the axle? Thanks in advance

justfreaky:
Not sure why you are missing 2. But if they are stripped, you could Helicoil them.

914racing:
Thanks. When I was loosening the nuts, the stud and nut came off as they must have snapped.

justfreaky:
So the stud is broken? Or did it just come out with the nut?

Steve

Navigation

[0] Message Index