LEGENDS > Engine Care & Tuning

Air filters

<< < (3/3)

justfreaky:
Yes. Be sure not to over oil the foam filters.

Steve

wolfpack1992:
It says to spray the oil so they look sightly red. is that correct and to also let it dry as well

Legends57x:
Assuming that you are referring to the larger non foam oblong filters with chrome end caps, you can clean them with soap and water and then letting them air dry. I would suggest using a 2-3 gallon pail with Dawn or Palmolive dish wash soap and warm water. Let them soak for awhile, slosh them back & forth in the pail a few times, and then rinse them with clean warm water. Let them dry for at least 24 hours and then yes, lightly spray them(I used the aerosol cans) with the K&N filter oil around the entire plenum so they slightly look red. Do not overoil them to the point of oil dripping all over the place. The K&N filter oil is not made to clean the filters, only to aid in the process of assisting the filter plenum material capturing very small dirt particles.

Good luck!  ;)

wolfpack1992:
I have the K&N filters and I bought the K&N Air Filter cleaning kit

Navigation

[0] Message Index

[*] Previous page