Author Topic: Rear Wilwood Calipers /  (Read 16112 times)

Offline rallyka

  • Newbie
  • *
  • Posts: 4
Rear Wilwood Calipers /
« on: December 13, 2020, 01:53:02 am »
Hi Guys
Newbie to Legends, I usually Rally here in UK but Covid is stopping that at the moment so have purchased a Legend to play at Hillcliming as I live very close to Shelshley Walsh course.
Looking to fit Wilwood calipers to rear of a legend as is to be a hill climb / track car in UK.
Appreciate over kill and will be dialed out with bias but want same caliper front and rear.
What Hawk bracket would do this or is there another way?
Thanks for any help
Andy




Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4512
Re: Rear Wilwood Calipers /
« Reply #1 on: December 13, 2020, 01:23:50 pm »
Hey Andy,

You will need to know the mounting hole spacing on the caliper (3 1/4" or 3 3/4") and the rotor diameter (10 1/4" or 10 5/8").
IE: If you have  3 1/4" mounting holes on the caliper and a 10 1/4 rotor the bracket number would be 31-325.
Hope that helps you.

Steve
Better to be hated for who you are, Than to be loved for who you are not.


Offline rallyka

  • Newbie
  • *
  • Posts: 4
Re: Rear Wilwood Calipers /
« Reply #2 on: December 13, 2020, 02:19:51 pm »
Thanks Steve.
I was hopefully going to mount front standard disks on rear, then use the wilwood front caliper on rear also if possible as they are cheap enough. 3.75 centres 0.38 disk?

Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4512
Re: Rear Wilwood Calipers /
« Reply #3 on: December 13, 2020, 02:25:52 pm »
I am planning a similar swap for my SCCA car. I have not measured the rotor diameter yet. If 10 1/4" (with 3 3/4") use part number 31-375. If 10 5/8" rotor, use part number 31-385.

Steve
Better to be hated for who you are, Than to be loved for who you are not.

Offline RPM

  • Full Member
  • ***
  • Posts: 107
    • Raduechel Performance Motorsports
Re: Rear Wilwood Calipers /
« Reply #4 on: December 13, 2020, 04:18:27 pm »
I should have a set of rear wilwood calipers and mounting brackets available after the first of the year. We are converting over a thunder roadster to the GTR version and upgrading the brake system with bigger four piston calipers.

Disc brakes are standard issue on the rear of the thunder roadster.




Randy - RPM



Offline rallyka

  • Newbie
  • *
  • Posts: 4
Re: Rear Wilwood Calipers /
« Reply #5 on: December 14, 2020, 11:18:44 am »
Hi Randy
That is the set up I need. Im in UK otherwise would buy that from you. Is there a part number for the bracket and also what disks size type would fit?
Thanks for all the help.
Andy


Offline justfreaky

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4512
Re: Rear Wilwood Calipers /
« Reply #6 on: December 14, 2020, 11:39:28 pm »
Andy,
Randy is a dealer out of California (USA). I think he would ship to you. Send him a message. Great guy to deal with!

Steve
Better to be hated for who you are, Than to be loved for who you are not.

Offline rallyka

  • Newbie
  • *
  • Posts: 4
Re: Rear Wilwood Calipers /
« Reply #7 on: December 15, 2020, 03:23:00 pm »
Thanks Steve
Ive Pmd him


 

anything