You mentioned as stated in your reply "If I have too long or short of a wheelbase, I take the upper heim and adjust it in or out and adjust the lower heim. (1 turn on top and 2 turns equally on lower." This does not sound right to me. When I adjusted front end for wheel base, I would turn both lower trailing arm heim and upper radius heim equal amount of turns in or out where they attach to frame. If you adjust top heim one turn and bottom 2 turns, yes, caster and camber will change. Otherwise, most of your set points look to be OK, but I would suggest adding a little more camber to RF, 5-6°, if you're running on asphalt. Hope this helps!