Help with rods and helms

[steelbullet]

I have a chasis that has been completely stripped can anyone tell me how many of each size rods to order  and helms?
Thanks

[VMS Motorsports]

I have multiple packages available at vmsmotorsports.com , or cam put together whatever you like

[knoxracing]

To make sure you have enough for a couple variables you would order.
1) 5- 11 inch bars.
2) 3- 12 inch bars.
3) 20 heims  (10 right and 10 left
4) A panhard bar
5) and an upper link bar

[racerrad8]

3)20 heims  (12 right and 8 left

The count for the required amount of rod ends is a total of 20 but they are equally divided at 10 left & 10 right.

Randy - RPM

[VMS Motorsports]

Yes, heim joints you would need 10 RH and 10 LH.
Radius rods depend on how you set the car up.
You will need:
1- 23.5" Panhard bar
1- 6.5" Upper link
6- 11" or 12" bars depending on your set-up, but 6 is what the car takes

[steelbullet]

Guys i have noticed inex stamped  on the few bars that came with the chassis , is that required and is that what come with your kit Jim
Thanks

[IraceLegends77]

They do not require an INEX stamp.

[VMS Motorsports]

I am not a USLC dealer, so my rods do not have an INEX stamp