LEGENDS > Lubrication

OIL COOLER QUESTIONS

(1/2) > >>

HAMMERIN101:
i bought my car with no engine......it has 2 oil coolers and a fan......oil pressure guage and a temp guage..and remote filter.......i have all the stuff except the oil pan fittings.it appers to be plumbed like the one on the 600 web site.....what fitting do i need for the oil pan.....11/16 wrench fits the an lines that go to the oil pan i think they are #6 am i correct..... also  do the oil pan fitting need to be straight or angled....and if plumbed like  the one on 600 race parts site   is that still the best way..thanks Doug

VMS Motorsports:
Randy has the fittings, here is the link: http://rpmracingca.com/proddetail.asp?prod=Cooling%3A%2D6Panfitting

HAMMERIN101:
where do i hook the oil pressure gauge and where do i hook up the oil temp gauge?

VMS Motorsports:
There is a port on the engine you can hook the pressure gauge up to. You can put the oil temp gauge wherever you can find somewhere. In my sedan, I put a Tee off the oil filter adapter for the oil temp gauge

HAMMERIN101:

--- Quote from: VMS Motorsports on August 25, 2012, 12:52:35 pm ---There is a port on the engine you can hook the pressure gauge up to. You can put the oil temp gauge wherever you can find somewhere. In my sedan, I put a Tee off the oil filter adapter for the oil temp gauge

--- End quote ---
you got a picture of the port  and of the t off the filter adapter?  thanks

Navigation

[0] Message Index

[#] Next page