remote oil filter adapter

[racerdad]

i am changing from the ( i think it is called ) a texas oil filter to a remote oil filter. my car is not at my house so i was hoping some on could tell me how the red hocky puck adapter goes on the back of the engine. what part threads on to what. do i need any thing to put it on the engine. thanks cody

[igotmylegend]

Is this what your talking about?

http://www.hankscottracing.com/HSROilPlumbing.htm

[VMS Motorsports]

Here is the plumbing diagram you need for a regular remote oil filter set-up

[racerdad]

no what i need to know is does the adapter bolt to the engine or does the male thread on the inside thread to the engine.thanks cody

[knoxracing]

Yes, the center fitting threads into the motor, if you are using a used puck or one that has sat for a while, change the orings. You can buy them from alot of places, like a bearing supplier.

[racerdad]

thank that how i thought it worked. i did get new orings but 3 of them came from hank scott. i know the big one goes on the big outer ring and the one on the center fitting but were does the third one go. thanks cody