Dual Oil Cooler plumbing

[erich17]

I am running 2 of the small oil coolers on top of eachother and would like to see a diagram on how to run the lines.  Thanks for your help

[justfreaky]

Hi Erich,

Welcome to LegendsRacer!
Check this thread and see if it helps you out.
http://www.legendsracer.com/index.php?topic=318.0

Steve

[erich17]

I reviewed the thread and didnt find any conversations about a dual system like mine.  I am wanting to run a dual system with a 3 port remote oil filter.  I will also be running a temp and pressure gauge.  Let me know the best way to do it.

[justfreaky]

I don't have a diagram for you for the dual coolers. Perhaps someone has one handy and will post it.
If you re-read the thread, I think you will find lots of useful information.
Sorry I couldn't help you.

Steve

[thunder938]

I ran a 2 cooler set up, but with a 2 port remote filter with no gauges.  Most guys dont run gauges. maybe a gear ind.  Anyway there wanys to run the return from the coolers to the main oil galley on the left side of the motor above the pan.  Then pull PSI from the center of the puck on the back.  So call HANK SCOTT or anythere builder and tell what you are trying to do.  It is just had to do this in a message board